Part Number: 0167502A0008
The wear plate and cutting ring are a pair of closely-fitted parts with relative motion, and the two surface are welded with wear-resistant layer.
1 | Material | wear resistant steel body, tungsten carbide |
2 | Tensile Strength | ≥ 2500 N/mm2 |
3 | Carbide HRA | > 86 |
4 | Electrode HRC | > 63 |
5 | Life service | > 30,000 cbm |
When the gap between the spectacle wear plate and cutting ring is large, it will be wear faster. Therefore, you must always pay attention to the gap between the wear plate and the cutting ring. Once the gap is found to increase, you must immediately tighten nut or replace the wearing parts to prevent the mortar from entering the friction surface. When the rubber spring loses its elasticity, it needs to be replaced immediately.
